Display modules
ENMI display modules serve for visualization of data provided by ENIP-2, ESM, ENMU, and ENMV-1 devices.
A single RJ-45 patch cord is used for serial connection to the master device, and in case of ENIP-2 or ESM, additional power supply is not needed for operation.
120 mm-sized modules can latch to the back of ENIP-2 or ESM.
Different modifications of ENMI are aimed at various areas of application.
| ENMI-3 | ENMI-4m | ENMI-4e | ENMI-6 | ENMI-7 | |
|
Type of display |
seven-segment LED (3 lines of 4 digits) |
TFT 4.3" 480 × 272, TFT 7" 800 × 480, touch screen |
TFT 4.3" 480 × 272, TFT 7" 800 × 480, touch screen |
TFT 4.3" 480 × 272, touch screen |
OLED 2.42" 128 × 64, monochrome |
|
Application |
ENIP-2 | ENIP-2, ESM, ENMV-1, ENMU | ENIP-2, ESM, ENMV-1, ENMU |
Diagnostic panel |
ENIP-2, ESM, ENMV-1 |
|
Interfaces and protocols |
RS-485 (Modbus RTU) |
RS-485 (Modbus RTU); USB |
100Base‑TX (Modbus TCP); USB |
100Base‑TX (SNMP, Modbus TCP, NTP); USB |
RS-485 (Modbus RTU) |
|
Power supply |
10...36 VDC, 10 W |
10...36 VDC, 3 W; 120...370 VDC or 100...265 VAC (45...55 Hz), 10 VA |
10...36 VDC, 3 W; 120...370 VDC or 100...265 VAC (45...55 Hz), 10 VA |
10...36 VDC, 5 W |
10...36 VDC, 2 W |
|
Operating temperature |
−40...+55 °С | −20...+55 °С | −20...+55 °С | −20...+55 °С | −40...+55 °С |
| Design and mounting | 120 × 120 × 49 mm, 96 × 96 × 86 mm | 120 × 120 × 49 mm, 146 × 226 × 55 mm | 120 × 120 × 49 mm, 146 × 226 × 55 mm | 120 × 120 × 49 mm | 96 × 96 × 86 mm |